Power converter installation in Seacraft scooter, together with E/O output - twin cable adapter (2 x 70cm

Seacraft E/O Power Converter

The Seacraft E/O power converter lets your DPV power external heating and lighting systems while providing integrated control and monitoring on the scooter display. The outlet uses a regulated voltage output designed for personal heating systems and 12 V E/O lights.

Control and monitoring

• Activate the power outlet menu: on gear 0, hold both triggers for 3 seconds.
• Use the Seacraft piezo gear buttons to select a power level or set the outlet to OFF.
• A short press on any button returns to the normal driving screen so you can drive while using an E/O device.
• To view monitoring information (set voltage and power draw), short-press both triggers on any gear to open the monitoring screen.

Output levels and limits

• Five selectable voltage steps corresponding to heating power levels: 20% (6.0 V), 40% (7.5 V), 60% (9.4 V), 80% (10.7 V) and 100% (12 V).
• Maximum allowed output power: 150 W.
• The 12 V setting supports most 11.1 V and 14.4 V light heads.

Cable adapters

• Twin E/O cable adapter: connects two loads simultaneously (for example, personal heating + lighting).
• Single E/O cable adapter: supports one load.
• Custom cable solutions for external devices operated on 6–12 V (max 150 W) are available on request.

Hermetic charging port

• The hermetic charging port is waterproof up to 11 bar (approximately 100 m) even without the cap installed, reducing the risk of flooding from accidental operator error.
• When an E/O cord adapter is connected the interface is waterproof to depths greater than 300 m.

Compatibility and installation

• The power converter can be ordered factory-installed with new scooters or added later; installation requires the internal power converter to be fitted inside the electronic chamber.
• Installation and upgrades are performed only at the Seacraft factory or authorized service centers.
• The E/O outlet can be added to Seacraft FUTURE and GHOST scooters from model year 2020 (serial numbers higher than #128) because those electronic boards support the upgrade.
• For upgrades you must also replace or upgrade the charging port and charger connector; include the charger supplied with the DPV when arranging the upgrade.
• The hermetic charging port requires a shorter charging port cap with the original hole; if your cap is not compatible, a replacement or modification is necessary.

Note: Factory or authorized-service installation is required; contact your dealer or Seacraft for upgrade options and pricing.