Seacraft FUTURE AirTravel 800 – complete set

Lightweight and powerful
It’s the lightest (only 16 kg with battery), the fastest and most compact scooter in its class currently available on the market. Its additional advantage is the long range of diving, which was achieved mainly by the high efficiency of the drive unit and the high power of the battery.

Features that make the difference
Magnetic propulsion
The most unique element of Seacraft construction is its motor which operates directly in the water.

Specially designed and patented solutions allow complete elimination of the drive shaft and the need for unreliable seals and gear transmissions used in other DPVs.

Post-swirl stator system
Seacraft scooters use innovative stator system, inspired by jet engine construction. It provides zero turning force on the scooter’s handle at all speeds range and increased efficiency of drive system- resulting in ~8% more thrust.

Airfoil shaped propeller
Seacraft designed a unique propeller adjusted for the diver’s load and speeds- which are much different than regular boat operations. Airfoil shape allows to not only push the water away, but act as aeroplane wing – what gives great work efficiency, and high force also on lower RPM levels.

Dual steering handle
Two handles, and two triggers. This makes hands switching on the DPV very intuitive- and can be easily done also on full speed.

Burntime display
Remaining burntime is being constantly calculated, taking current gear and engine load into account – enabling a safe realisation of the diving plan.

Lightweight
All innovative solutions allows to provide lightest equipment in it’s class. With ready-to-dive Future1000 being just 15,9kg, it is lightest scooter with such performance on the market.

Battery management system
Seacraft manufactures dedicated DPV battery managment system- which is perfectly designed to take special care about one of the most expensive DPV elements, providing it’s long and reliable work.

BLAC steering
BLAC shortcuts for BrushLess Alternating Current, and it is the most efficient way of controlling electric motor.

Booster
A special Seacraft gear- “+”, with unique operation. In constant RPM mode, it allows to gradually accelerate the user to maximum possible speed, using the benefit of increased nozzle work, and dynamic resistance decreasing with faster water flow.

Double tap
Two fast clicks on opposite trigger- when running the DPV- will switch the gear to 9, allowing to quickly catch up with the partner. Another two clicks, return to previous cruising speed.

Easy propeller removal
In case of entanglement underwater, propeller can be easily removed underwater. No tools, no screwing, simply- pull it away! As it is held in place by magnetic force, reassembly is also trival.

Easy trimming
Seacraft allows for easy adjustment of weight, in order to trim it for fresh, salt, mixed, or whatever water you need to operate in, accounting personal preferences of diver.

External charging port
External charging port enables quick charger connection without having to disassemble the entire unit for charging.

Basically, there is no need to open the scooter any more – except for internal trimming. Humidity sensor in electronics chamber additionally allows for easy inspection of DPV’s interior without hull disassembly.

Extreme Efficiency
Secraft is extremely well optimized for work efficiency. This means, that it drains drastically less energy to propel a diver, than than other construction. Tests proven that it can be even 50% less power used for the same load, compared with popular brands constructions.

Full one-handed control
Seacraft steering allows using only one hand to control all the options – acceleration, deceleration and motor activation. Either left or right hand can be used for that.

Handle up position
Seacraft batteries are built with assymetric cell’s mass distribution- with it’s concentration on the DPV’s bottom. This ensures it’s up-right position, and easy access to handles- as they are always in intuitive position.

Increased scoter’s stability while driving is another benefit from this solution.

Li-Ion power
Lithium- Ion batteries revolutionized DPV world, allowing to condense electric power source in much smaller and lighter size compared to old Ni-Mh, and lead-acid technologies.

Due to extreme power, it requires well designed and executed construction. Seacraft manufactures batteries in own facility using a highest quality single cells, and modern technology. Single battery packs are welded with thick plates what provides great mechanical strength, and reliable work even with high load for extended time.

Low-magnetic zone
Due to the engine located outside of the scooter’s hull- it’s magnetic influence on assembled devices (as for example, compass or ENC console) is very low.

Master switch
There is only one switch in Seacraft scooters- located in the middle of the unit. It effectively cuts out all unit operation, being a safety “kill” switch. It’s non-contact construction ensures no hull penetration point, and reliable work.

Onboard computer
Built-in computer allows for full, continuous and current control of all operating parameters. Scooter has a colour display, ewith of all important user data as: battery status, enabled gear, work time, power consumption, battery voltage, RPM, even temperature and humidity in the electronics chamber.

There is also an estimated remaining runtime calculation, what allows to better prepare, plan and execute dives.

Scooter history
Real trigger time says a lot about DPV usage. Now- the unit’s history can be easily accessed in order to plan maintenance, or to prove it’s real usage when selling on after-market.

Time lock
Time lock is a unique Seacraft safety feature. To protect from uncontrolled scooter activation, after user pre-defined time- 3-60s, unit returns automatically to zero gear.

User customization menu
All of the scooter’s features can be customized in the built-in user accessible settings menu. Useful functionalities- as maximum power limiting, engine modes choice, and functionalities customization can be accessed even underwater.

Sealed Battery
To provide maximum safety, Seacraft batteries are sealed- in order to prevent any splashes/ moisture to affect it’s systems. Also, this solution provides that in case of minor floodings, there is much lower risk of partial battery damage.

Silent drive
Silence… it what we look for underwater. Seacraft is most silent DPV on the market- with virtually no sound generated, thanks to transmission-less, and shaft-less construction.

specification

Motor
Working time at optimal speed: >270 min (4 5m/min)*
Working time at maximum speed: >80 min (gear 9)*
Range: >12,1 km*
Maximum static thrust: 340 N
Maximum speed: 1,6 m/s

* Applicable in terms of a diver in a twinset 2 x 12, in a dry suit, in fresh water. Range tested for optimal speed.

Battery
Battery type: modular Li-Ion
Battery capacity: 780 Wh
Maximum battery voltage: 37,8 V
Minimum battery voltage: 26 V
Average time of charging 90%: 3 h
Average time of charging 100%: 4 h
Charger operating voltage: 230 V / 50Hz / 240 W

Dimensions
Width: 360 mm
Lenght: 845 mm
Height: 410 mm
Housing diameter: 160 mm
Weight without battery and ballast: 10 kg
Weight with battery and fresh water ballast: 15,9 kg

Other
Maximum depth: 150 m
Correct displacement (with adjusted ballast): Neutral
Level / Trim (with adjusted ballast): Neutral
Operating temperature: -5/+45⁰C***
Storage temperature: -25/+50⁰C
Temperature while charging: +10/+40⁰C

*** At temperatures below 0 ⁰C, due to properties of lithium cells, the battery capacity and hence the scooter’s performance can be significaantly reduced it. It is a reversible poccess – after raising the temperature of the battery to temperature level above 0 ⁰C the capacity of the battery returns to the nominal capacity.

Set includes:
– F_2042 Seacraft FUTURE AirTravel 800 DPV
– U1054 Charger 240W hermetic charging port connector
– U1060 DPV tow cord 1,8 m with boltsnap and wo tensioners- O1001 Spare parts and consumables set for GO DPV
– F1064 Harness with a carabiner for the DPV nose 160 mm
– F1034 Spare parts and consumables set for 160 mm DPV