OThree 90Ninety DT

If you’re not a hummingbird diver and require a suit that will take the knocks from a piece of wreckage, or a squeeze through a sump that looked easier than it was, then the 90Ninety DT combines durability with ease of use in equal measure.

20% heavier than the 90Ninety, but twice the force required to tear.

All of the 90Ninety specification.

Material: High Stretch Rip-Stop Trilaminate.
Heavy Duty material throughout the suit.
Manufactured by the world leader of these types of textiles.
Cut on the bias to maximise stretch, not yield.

Colour Options: Graphite Grey.

Construction: Proven methods in seam construction and waterproofing.

Front Entry: Full Telescopic Torso
Locked in place with fully adjustable internal braces and crotch strap.

Zip: BDM Metal, protected with a no-nonsense, no-maintenance external cover.

Neck: Si Tech Neck ring system.
Both systems accommodate Silicone, Latex or O’Three neoprene seals.
In-field replacement can be carried out by you in minutes.
Can be worn with wet or dry gloves.

Wrist: KUBI Cuff side system.
Both systems accommodate Silicone, Latex or O’Three neoprene seals.
In-field replacement can be carried out by you in minutes.
Can be worn with wet or dry gloves.

Dry Glove: KUBI system, as standard.

Valves: Apeks low profile Auto Dump.
Swivel Inlet & Carbon Hose.

Boots: O’Three’s proven 4mm low profile Pivot Boot.
Warm and snug.
Reinforced throughout, with built-in fin stop and in-step strap.

Pocket: Cargo 25 with built-in slate pocket, D-Rings, and Bungees.

Knees: Double layer and reinforced with PU.
Impact absorbing 3D Mesh inserts.

Anti Abrasion: PU Laminated to shoulders, elbows, and seat.

We will contact you within one working day and send a measurement form to ensure the best fit for your drysuit.

As well as the full specification above, the cost of your suit includes many customising options, some of which are listed below.
A choice of:
– Material Combinations
– Customised Tailoring
– Knee Pads
– Shoulder Pads
– Valve Options
– Hose Options
– Two Pockets
– Reflective’s
– Braces (if required)
– Boot / Soft Sock
– Zip Weight
– Zip Guard
– Seals

Other options are available at additional cost;
– P-Zip
– P-Valve
– High Profile Auto, break pressure x2
– Commercial reinforcements
– Additional valves
– Extra Pockets
– Hood Attached
– Dry Glove Systems