Analyzer He/O2

Analyzer He/O2
The analyzer is characterized by its high accuracy and reliability thanks to an innovative solution for measuring helium concentrations. This technology works on the principle of measuring the speed of sound, thanks to which it is never necessary to replace the helium sensor.
Another quality of the Divesoft analyzer are its other functions and add-ins. Analyzers have an in-built calculator for mixing gases, it can be connected to a compressor for watching the oxygen concentration during a continuous filling with warning alarms (a relay can also be connected for automatic turning off of the compressor after surpassing critical values), and with the aid of measuring modules it is possible to measure electrical voltage and resistance. This is especially useful for finding out the state of the diving lights and scooters of for example of the state of a light bulb.
The analyzer can identify some other gases and mixtures used for diving. In case of a hypoxic mixture without the presence of another inert gas other than nitrogen, it warns you not to breathe such gas through the text “FOUL AIR”. It can also identify argon and in special setting measure its purity (presence of air).
Oxygen electrochemical sensors and battery built-in analyzer carry limited warranty of 12 months.
Analyzer is charger through USB 2.0 AB cable.

Packaging includes:
#8312 Analyzer He/O2
#3001 Oxygen Sensor Divesoft 22S
#8438 Simple flow limiter
#3433 Semi-hard zipper case 250×205
#3134 USB 2.0 “AB” cable

Technical specification
Analyzer He/O2
Dimensions of the analyzer: 82 × 200 × 37 mm (3 1/4 × 7 7/8 × 1 1/2 inches)
Weight: 720 g (1.6 lb)
Range of measuring the concentration of oxygen: 0 to 100 %
Range of measuring the concentration of helium: 0 to 100 %
Measuring temperature: 0 to +40° C (32 – 104° F)
Mixture pressure: consistent with ambient pressure, in the range of 700–1100 millibars (20–32 inches of Hg) which corresponds to the standard atmosphere at an elevation in the range of 0 to 3000 m (0–10000 feet) above sea level.
Rated gas throughput: 0.2 L/min
Basis of measuring the speed of sound: 800 mm
Measuring frequency: 2 kHz
Oxygen sensor: Divesoft R22 S (Molex connector)
Power source: Rechargeable battery – Li-ion
The connection dimensions of the sampler: standard for a “DIN” valve (EN 144-2) for 200/300 bars (G 5/8 thread). Samplers with a connection to any standardized or common valves are available on request or as optional equipment.
Warranty: 24 months, 12 months on battery and oxygen sensor